High air pressure DTH hammer
Hammer Length without bit:899mm
Top sub thread:API23/8"REG PIN
Outside diameter:82(mm)
Weight::25kg
Bit diameter:90-110(mm)
Working Pressure:12-24(Bar)
Air consumption:8-12(M³/min)
Bit shank:DHD3.5
Category：
DTH hammer tools
Keywords：
DTH hammer tools
Description
Generally, the High air pressure DTH hammer is about 0.7-1.2MPa, which is suitable for drilling in hard rock and extremely hard rock formations. The characteristics of high pressure DTH hammer are high drilling speed and high drilling quality, but the noise and vibration are very high, so it is necessary to control the noise and vibration. The High Air Pressure DTH Hammers we provide include DHD/QL/MISSION series, The DHD/QL/MISSION series is a valve less type hammers designed for high performance at low operating air pressure. All critical internal components are heat treated under strict control to maximize tool longevity.
we produces various type of High air pressure DTH hammer which can be compatible with DHD, QL, HP and SD shank of DTH bits and performs very well. The high air pressure DTH hammers are available with or without bottom valve,The high air pressure DTH hammer designed by our company without bottom valve is one of the most advanced designs High DTH pressure hammers transmit intense impact energy with low energy loss. This results in good rock breakage, high penetration and high productivity.
Performance
1. DHD/QL/MISSION series is a valve less type hammers designed for high performance at low operating air pressure.
2. Suitable bits have a strong robust design without foot valve to withstand heavy duty application.
3. DHD/QL/MISSION series hammers maximizes energy output and reduces service requirements.
4. Wear sleeve is not reversible.
5.All critical internal components are heat treated under strict control to maximize tool longevity.
Applications
High air pressure DTH hammers are used toUnderground Mining, Water well, Mining, Quarry etc.
Specification
| QL40 | Product data: | ||||
 | Hammer Length without bit: | 995(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 99(mm) | ||||
| Weight: | 39(KG) | ||||
| Bit diameter: | 115-140(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 8-14(M³/min) | ||||
| Bit shank: | QL40 | ||||
It em Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | QL40-01 | 8、Piston | QL40-08 | ||
| 2、O-Ring | QL40-02 | 9、Bit Retainer Sleeve | QL40-09 | ||
| 3、Cap | QL40-03 | 10、Driver Sub | QL40-10 | ||
| 4、Check Valve | QL40-04 | 11、Outer Sleeve | QL40-11 | ||
| 5、Spring | QL40-05 | ||||
| 6、Air Distributor | QL40-06 | ||||
| 7、Inner Cylinder | QL40-07 | ||||
| QL50 | Product data: | ||||
 | Hammer Length without bit: | 990(mm) | |||
| Top sub thread: | API 2 3/8" REG PIN | ||||
| Outside diameter: | 126(mm) | ||||
| Weight: | 73(KG) | ||||
| Bit diameter: | 135-155(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 9-19(M³/min) | ||||
| Bit shank | QL50 | ||||
Item Description | Part Number | ltem Description | Part Number | ||
| 1、Top Sub | QL50-01 | 8、Piston | QL50-08 | ||
| 2、O-Ring | QL50-02 | 9、Bit Retainer Sleeve | QL50-09 | ||
| 3、Cap | QL50-03 | 10、Driver Sub | QL50-10 | ||
| 4、Check Valve | QL50-04 | 11、Outer Sleeve | QL50-11 | ||
| 5、Spring | QL50-05 | ||||
| 6、Air Distributor | QL50-06 | ||||
| 7、Inner Cylinder | QL50-07 | ||||
| QL60 | Product data: | ||||
 | Hammer Length without bit: | 1080(mm) | |||
| Top sub thread: | API31/2"REG PIN | ||||
| Outside diameter: | 148(mm) | ||||
| Weight: | 93(KG) | ||||
| Bit diameter: | 165-203(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 11-26(M³/min) | ||||
| Bit shank: | QL60 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | QL60-01 | 8、Piston | QL60-08 | ||
| 2、O-Ring | QL60-02 | 9、Bit Retainer Sleeve | QL60-09 | ||
| 3、Cap | QL60-03 | 10、Driver Sub | QL60-10 | ||
| 4、Check Valve | QL60-04 | 11、Outer Sleeve | QL60-11 | ||
| 5、Spring | QL60-05 | ||||
| 6、Air Distributor | QL60-06 | ||||
| 7、Inner Cylinder | QL60-07 | ||||
| QL80 | Product data: | ||||
 | Hammer Length without bit: | 1220(mm) | |||
| Top sub thread: | API 4 1/2" REG PIN | ||||
| Outside diameter: | 180(mm) | ||||
| Weight: | 177(KG) | ||||
| Bit diameter: | 195-254(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 15-34(M³/min) | ||||
| Bit shank: | QL80 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | QL80-01 | 8、Piston | QL80-08 | ||
| 2、O-Ring | QL80-02 | 9、Bit Retainer Sleeve | QL80-09 | ||
| 3、Cap | QL80-03 | 10、Driver Sub | QL80-10 | ||
| 4、Check Valve | QL80-04 | 11、Outer Sleeve | QL80-11 | ||
| 5、Spring | QL80-05 | ||||
| 6、Air Distributor | QL80-06 | ||||
| 7、Inner Cylinder | QL80-07 | ||||
| HP40N | Product data: | ||||
 | Hammer Length without bit: | 885(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 100(mm) | ||||
| Weight: | 35.5(KG) | ||||
| Bit diameter: | 115-140(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 8-14(M³/min) | ||||
| Bit shank: | HP4 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | HP40N-01 | 8、Piston | HP40N-08 | ||
| 2、O-Ring | HP40N-02 | 9、Jump Ring | HP40N-09 | ||
| 3、Cap | HP40N-03 | 10、Guide Sleeve | HP40N-10 | ||
| 4、Check Valve | HP40N-04 | 11、Bit Retainer Ring | HP40N-11 | ||
| 5、Spring | HP40N-05 | 12、Driver Sub | HP40N-12 | ||
| 6、Air Distributor | HP40N-06 | 13、Outer Sleeve | HP40N-13 | ||
| 7、Inner Cylinder | HP40N-07 | ||||
| HP50N | Product data: | ||||
 | Hammer Length without bit: | 970(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 126(mm) | ||||
| Weight: | 61.5(KG) | ||||
| Bit diameter: | 138-165(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 12-22(M³/min) | ||||
| Bit shank: | HP5 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | HP50N-01 | 8、Piston | HP50N-08 | ||
| 2、O-Ring | HP50N-02 | 9、Guide Sleeve | HP50N-09 | ||
| 3、Cap | HP50N-03 | 10、Jump Ring | HP50N-10 | ||
| 4、Check Valve | HP50N-04 | 11、Bit Retainer Ring | HP50N-11 | ||
| 5、Spring | HP50N-05 | 12、Driver Sub | HP50N-12 | ||
| 6、Air Distributor | HP50N-06 | 13、Outer Sleeve | HP50N-13 | ||
| 7、Inner Cylinder | HP50N-07 | ||||
| DHD35N(35A) | Product data: | ||||
 | Hammer Length without bit: | 899(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 82(mm) | ||||
| Weight: | 25(KG) | ||||
| Bit diameter: | 90-110(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 8-12(M³/min) | ||||
| Bit shank: | DHD3.5 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | DHD35N-01 | 8、Piston | DHD35N-08 | ||
| 2、O-Ring | DHD35N-02 | 9、Guide Sleeve | DHD35N-09 | ||
| 3、Cap | DHD35N-03 | 10、Bit Retainer Ring | DHD35N-10 | ||
| 4、Check Valve | DHD35N-04 | 11、O-Ring | DHD35N-11 | ||
| 5、Spring | DHD35N-05 | 12、Driver Sub | DHD35N-12 | ||
| 6、Air Distributor | DHD35N-06 | 13、Outer Sleeve | DHD35N-13 | ||
| 7、Inner Cylinder | DHD35N-07 | ||||
| DHD40N(45A) | Product data: | ||||
 | Hammer Length without bit: | 1030(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 99(mm) | ||||
| Weight: | 38(KG) | ||||
| Bit diameter: | 115-140(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 8-14(M³/min) | ||||
| Bit shank | DHD340A、COP44 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | DHD40N-01 | 8、Piston | DHD40N-08 | ||
| 2、O-Ring | DHD40N-02 | 9、Guide Sleeve | DHD40N-09 | ||
| 3、Cap | DHD40N-03 | 10、Bit Retainer Ring | DHD40N-10 | ||
| 4、Check Valve | DHD40N-04 | 11、O-Ring | DHD40N-11 | ||
| 5、Spring | DHD40N-05 | 12、Driver Sub | DHD40N-12 | ||
| 6、Air Distributor | DHD40N-06 | 13、Outer Sleeve | DHD40N-13 | ||
| 7、Inner Cylinder | DHD40N-07 | ||||
| DHD50N(55A) | Product data: | ||||
 | Hammer Length without bit: | 1187(mm) | |||
| Top sub thread: | API 2 3/8"REG PIN | ||||
| Outside diameter: | 126(mm) | ||||
| Weight: | 66(KG) | ||||
| Bit diameter: | 138-165(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 9-19(M³/min) | ||||
| Bit shank: | DHD350R、COP54 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | DHD50N-01 | 8、Piston | DHD50N-08 | ||
| 2、O-Ring | DHD50N-02 | 9、Guide Sleeve | DHD50N-09 | ||
| 3、Cap | DHD50N-03 | 10、Bit Retainer Ring | DHD50N-10 | ||
| 4、Check Valve | DHD50N-04 | 11、O-Ring | DHD50N-11 | ||
| 5、Spring | DHD50N-05 | 12、Driver Sub | DHD50N-12 | ||
| 6、Air Distributor | DHD50N-06 | 13、Outer Sleeve | DHD50N-13 | ||
| 7、Inner Cylinder | DHD50N-07 | ||||
| DHD60N(65A) | Product data: | ||||
 | Hammer Length without bit: | 1240(mm) | |||
| Top sub thread: | API 3 1/2"REG PIN | ||||
| Outside diameter: | 148(mm) | ||||
| Weight: | 110(KG) | ||||
| Bit diameter: | 165-203(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 12-22(M³/min) | ||||
| Bit shank | DHD360、COP64 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | DHD60N-01 | 8、Piston | DHD60N-08 | ||
| 2、O-Ring | DHD60N-02 | 9、Guide Sleeve | DHD60N-09 | ||
| 3、Cap | DHD60N-03 | 10、Bit Retainer Ring | DHD60N-10 | ||
| 4、Check Valve | DHD60N-04 | 11、O-Ring | DHD60N-11 | ||
| 5、Spring | DHD60N-05 | 12、Driver Sub | DHD60N-12 | ||
| 6、Air Distributor | DHD60N-06 | 13、Outer Sleeve | DHD60N-13 | ||
| 7、Inner Cylinder | DHD60N-07 | ||||
| DHD80N(85A) | Product data: | ||||
 | Hammer Length without bit: | 1359(mm) | |||
| Top sub thread: | API4 1/2"REG PIN | ||||
| Outside diameter: | 180(mm) | ||||
| Weight: | 175(KG) | ||||
| Bit diameter: | 195-254(mm) | ||||
| Working Pressure: | 12-24(Bar) | ||||
| Air consumption: | 15-28(M³/min) | ||||
| Bit shank | DHD380、COP84 | ||||
Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | DHD80N-01 | 8、Piston | DHD80N-08 | ||
| 2、O-Ring | DHD80N-02 | 9、Guide Sleeve | DHD80N-09 | ||
| 3、Cap | DHD80N-03 | 10、Bit Retainer Ring | DHD80N-10 | ||
| 4、Check Valve | DHD80N-04 | 11、O-Ring | DHD80N-11 | ||
| 5、Spring | DHD80N-05 | 12、Driver Sub | DHD80N-12 | ||
| 6、Air Distributor | DHD80N-06 | 13、Outer Sleeve | DHD80N-13 | ||
| 7、Inner Cylinder | DHD80N-07 | ||||
Previous Page:
:Next page
APPLICATION
The company has established long-term strategic cooperative relations with Shenhuo Group and many other enterprises, scientific research institutions and equipment enterprises. The company integrates resources, pays attention to product technology research and development, and has obtained 1 invention patent and 11 utility model patents. The company's main products are: all kinds of geological exploration, coal mining drilling for drill pipe, diamond bit, cutting teeth, drill drill, air drill, coal rock drill and fishing tools and other supporting products. Among them, the H22 drill rod repair equipment developed by the company solves the problem of drill rod damage repair work to fill the gap in the market.
RELATED PRODUCTS
With a commitment to excellence, we specialize in manufacturing high-performance SPC flooring that meets the diverse needs of our customers around the globe.
More
With a commitment to excellence, we specialize in manufacturing high-performance SPC flooring that meets the diverse needs of our customers around the globe.
More
With a commitment to excellence, we specialize in manufacturing high-performance SPC flooring that meets the diverse needs of our customers around the globe.
More
T51-885mm shank adapter for H712RP drifter
With a commitment to excellence, we specialize in manufacturing high-performance SPC flooring that meets the diverse needs of our customers around the globe.
MoreCONTACT US
Address:Zhangzhuang Village, Xihu Township, Yanggu County
Copyright © Yanggu Xinhe Drilling Tools Co.,Ltd. Powerby : CEGLOBAL SEO